Feeds:
Posts
Comments

Posts Tagged ‘woollen spinning’

One of the reasons I bought a spinning wheel, was to learn more about British rare sheep breeds and their wool and eventually to be able to spin yarns that will emphasise a particular breed’s wool qualities. Always on the look-out for learning opportunities, I jumped at the chance to sign up for Deborah Robson’s Wooltypes workshop at Fibre East this year. Together with Carol Ekarius, Deb Robson wrote the Fleece and Fiber Sourcebook; a terrific compendium on a huge amount of different rare sheep breeds, their wool, and how to work with them.

So far, I have only really used a worsted spinning technique. This is suitable for wool that has a longer staple (fibre length), but I expect that at the workshop we will also be working with shorter staple fibres. And for these fibres woollen spinning techniques are more suitable. For worsted spinning you prepare the fibres by combing them in order to get them all lying parallel; worsted spinning techniques aim to keep the fibres aligned – this results in a shiny, drapey yarn. For woollen spinning, however, you prepare the fibres by carding, and using a woollen spinning technique, the fibres end up all higgledy-piggledy in the resulting yarn. This makes the yarn lofty and very warm as it traps more air.

fleece, carders, rolags, and yarn

 

A pair of handcarders, finished yarns, rolags, and unprocessed fleece

So, what better fibre to use for practising making a woollen yarn, than the Shetland fleeces I brought back from Shetland Wool Week last year? As I only have one grey fleece (this particular shade of grey fleece is called Shaela in the Shetland dialect) and half a black fleece I think I have just about enough for a jumper. So how to combine the two colours in one garment? Perhaps the most obvious choise would be some stranded colourwork, however, this will take up more yarn than something knitted with a single yarn in each row. I didn’t fancy stripes either, but then inspiration struck, and I came up with a cunning blending plan. I’ll be making a few skeins each in pure shaela and in pure black, but for the remainder I’ll blend the shaela with the black on the handcarders; you can see the resulting rolags (the fibre tubes) in the picture above, and I’ll spin these up into some more skeins. But that’s not all! To blur the transition from shaela to black even more, I will ply a blended single (the single strand that makes up a, in this case, 2-ply knitting yarn) with a shaela single, and also a blended single with a black single to make some marled yarns. In the picture above you can see a skein of pure shaela on the left, and on the right a marled yarn made from a shaela single and a blended single.

JamesNorburyPortrait

James Norbury. Will I end up looking like this when I get older?

James Norbury Knitting Books

A few of my Norbury books: Traditional Knitting Patterns, Odham’s Encyclopaedia of Knitting, and Knit with Norbury

So what does James Norbury have to do with all this? Norbury (1904-1972) was, according to Richard Rutt, the “strongest single influence on British knitting during the 25 years after the Second World War.” I have a few of his knitting books, and reading through the patterns, it’s always the superb shaping that strikes me and that is exactly what I’m after. Handspun woollen spun yarn is a bit lumpy-bumpy by nature, but seeing that this is my first attempt at making enough yarn for a big project, and because I don’t have a lot of experience in spinning woollen, my yarn will be even more lumpy-bumpy and probably look very homespun, in every meaning of the word. So to make up for that I want to make a jumper using meticulous shaping and really push myself with that challenge. I’ll be employing the very best knitting techniques I know, knit all the pieces flat, and use good shaping. An example of this is the sleeve caps that Norbury uses in his patterns. There are three progressive rates of decreases, so that the sleeve caps are very rounded, just like they would be for a sewing pattern. I did once knit a jumper like this, which I don’t often wear for other reasons, but the shoulder on it fits me like no other.

James Norbury Polo Neck jumper

A polo-neck jumper designed by James Norbury; look at the shoulder shaping!

I will be documenting progress here on my blog, but as I do like to switch between projects, I think it will take some time before this jumper will actually be on my shoulder, but that’s okay. I like making things that take forever, and now that I’ve added spinning in the mix, you can make that forever and a day.

Read Full Post »

%d bloggers like this: